Jump to Contact Us page, or phone 1-603-226-3966
Jump to Contact Us page, or phone 1-603-226-3966

*Absorber capacities are RPM dependent. Water cooled absorbers require a minimum water flow of 1 g.p.m. @ 30+ p.s.i. for every 20 continuous Hp.

"Call Land & Sea, Inc. at (603) 226-DYNO for approximate power limits of specific configurations."

Info Catalog Selector
Prices

Optional DYNOmite Data-Acquisition Computer:

Expandable, surface mount, board system runs on 120-volt 60-Hz AC, 240-volt 50-Hz AC, or 12-volt DC
CE and/or UL approved (per locale)
“Pro” PC based 28, 56 or 112+ channel capable board sets, require DYNO-MAX software
“Lite” 3-channel (upgradeable to “Pro” above)
Optional portable “Pro” 28-channel capable handheld with 168-character LCD & keypad
Up to 1,000 recordings per second (per channel)
Quick disconnect data harness
Non-volatile setup memory
Rechargeable back-up battery option
Captures over 1-hour duration test runs
Real time and data playback displays
Observed and SAE corrected reports
“Smart Record” automated recorder triggering
RS232 or USB output to optional printer or PC with DYNO-MAX software option

Torque Transducer:

Type, performance, range, etc. vary with each application; call for exact specifications
S-beam load cells with full bridge strain gauges
Environmentally sealed
½% of full scale typical accuracy
Semi-automatic zero offset calibration
Temperature compensated
Optional wireless rotary-torque transducers available (see DYNOmite On-Board Dynamometer literature for details)

Hp, Torque, and RPM Capacity:

*Actual are RPM dependent. See online load charts for curves.
#12-HSx1 up to 25 Hp*
#12-HPx1 up to 50 Hp*
#12-HPx2 up to 100 Hp*
#18-HSx1 up to 100 Hp*
#18-HPx1 up to 200 Hp*
#18-HPx2 up to 400 Hp*
#24-HPx1 up to 400 Hp*
#24-HPx2 up to 800 Hp*
#24-HPx4 up to 1,600 Hp*
#30-HPx1 up to 600 Hp*
#30-HPx2 up to 1,200 Hp*
#30-HPx4 up to 2,400 Hp*
Hp options range from ¼ to over 10,000
Torque options from ¼ to over 5,000 lb-ft
RPM options from 500 to over 30,000

Engine Tachometer:

0 - 32,000+ RPM LCD display
0 - 128,000+ RPM via DYNO-MAX
RPM pulse type is selectable from ½ to 240 pulses per revolution
Quartz crystal calibrated
Magnetic RPM pick-up

Load Control and Power Supply:

Electronic Load Control & Power Supply
240-volt 60-Hz (or 50-Hz) AC @ 15-amp
Optional Electronic Throttle Controller

Liquid-Cooled Eddy-Current Absorbers:

Liquid Cooling - Standard
#12-HSx1 single rotor - uses 192-volt DC supply
#12-HPx1 single rotor - uses 192-volt DC supply
#12-HPx2 dual rotors - uses 192-volt DC supply
#18-HSx1 single rotor - uses 192-volt DC supply
#18-HPx1 single rotor - uses 192-volt DC supply
#18-HPx2 dual rotors - uses 192-volt DC supply
#24-HPx1 single rotor - uses 192-volt DC supply
#24-HPx2 dual rotors - uses 192-volt DC supply
#24-HPx4 quad rotors - uses 192-volt DC supply
#30-HPx1 single rotor - uses 192-volt DC supply
#30-HPx2 dual rotors - uses 192-volt DC supply
#30-HPx4 quad rotors - uses 192-volt DC supply

Engine Test Stand Options:

Inertia independent reaction torque cradle type
Friction independent reduction drive
Load cell over-travel protection
Instrument bearing trunnions

Approximate Dimensions and Weight:

#12-HPx1 liquid-cooled eddy-current absorber (only)
12"W x 12"L x 18"H - 250 pounds
#12-HSx1 liquid-cooled eddy-current absorber (only)
12"W x 12"L x 18"H - 250 pounds
#18-HPx1 liquid-cooled eddy-current absorber (only)
18"W x 15"L x 22"H - 350 pounds
#18-HPx2 liquid-cooled eddy-current absorber (only)
18"W x 19"L x 22"H - 650 pounds
#18-HSx1 liquid-cooled eddy-current absorber (only)
18"W x 15"L x 22"H - 350 pounds
#24-HPx1 liquid-cooled eddy-current absorber (only)
24"W x 17"L x 29"H - 650 pounds
#24-HPx2 liquid-cooled eddy-current absorber (only)
24"W x 23"L x 29"H - 1250 pounds
#24-HPx4 tandem liquid-cooled eddy-current absorbers (only)
24"W x 60"L x 29"H - 2500 pounds
#30-HPx1 liquid-cooled eddy-current absorber (only)
30"W x 22"L x 36"H - 1250 pounds
#30-HPx2 liquid-cooled eddy-current absorber (only)
30"W x 30"L x 36"H - 1650 pounds
#30-HPx4 tandem liquid-cooled eddy-current absorbers (only)
30"W x 70"L x 36"H - 3200 pounds

Data Collection Options:

See DYNOmite Dynamometer Conversion Systems section or separate Dynamometer Accessories Catalog for options.

Other Options:

See separate Dynamometer Accessories Catalog