Typical conversion kits include: DYNOmite data-acquisition computer with from 3 to over 112 channels (with or without optional LCD display and pushbutton handheld interface), full-bridge strain- gauge-equipped electronic load cell torque transducer, AC power supply/recharger, data wiring harness, engine-temperature thermistor, and protective carrying case. See Specifications or Models and Prices pages.
DYNOmite data- acquisition electronics automatically capture true torque, RPM, elapsed time, etc., while calculating Hp at up to 1,000 readings per second (that’s per channel, not just a total). The board’s computer can even be set to automatically apply Standard SAE correction factors for air temperature, barometric pressure, and relative humidity. This eliminates running engines to death while trying to manually record all the data. Handheld DYNOmite models display results on their LCDs and can print to an optional portable battery-powered printer. No prior computer knowledge is required to start testing and analyzing data like the pros. (Click here for a full list of each DAQ's features.)
DYNO-MAX™ Software option creates a full engine dynamometer lab console on your PC. Features include: real-time trace-chart graph display, adjustable visual and voice limit warnings, pushbutton controls, user configurable analog and digital gauges, plus incredibly powerful post-test data analysis tools. (Click here for a full list of DYNO-MAX's features.)
Integrate your PC by using DYNO-MAX with appropriate automated electronic load and throttle control hardware options for keyboard dyno control. Without special programming, operators can easily execute even complex race simulations and engine test cycles. No other dyno software adapts and expands so easily to virtually any level of testing sophistication.
Affordable expansion upgrades (up to 112+ channels) include: fuel-flow and airflow turbines, brake- specific fuel consumption, brake-specific air consumption, air/fuel ratio, exhaust-gas temperature, engine-temperature thermistors, air temperature, humidity, barometric pressure, sparkplug thermocouple kits, RTDs, pressure transducers, 0-5 volt auxiliary inputs (for many wide-band air/fuel ratio sensors, knock sensors, etc.) and outputs, high-speed cylinder-pressure mapping, and both servo load and throttle control options. Like the DYNOmite itself, these upgrades won’t eat your entire testing budget.
Available torque sensor options include full-bridge (temperature-compensated) strain-gauge S-beam load cells, high-resolution pressure transducers, and wireless rotary-torque transducers. All of them are maintenance free and feature our semi-automatic (pushbutton) calibration of zero offset. Conversions can usually retain the system’s original torque sensor and display in parallel with the new electronics.
Forget inaccurate paper and pencil logging – throw out that DOS-based software and get professional one-person operation. Owners of older analog Clayton, Dynojet, Dyno Dynamics, Froude, Go Power, K & O, Maha, Maxwell, Mustang, Stuska, Sun Road-a-Matic, SuperFlow, etc. brakes and rolls may take advantage of most DYNOmite and DYNO-MAX features without purchasing new absorbers or engine stands.
Advanced standard features including: Smart Record™, real-time data dampening, spike filtering, playback data averaging, atmospheric correction, auto-zeroing, instant playback, and integral rev-limiter.
DYNO-MAX control functions include: water-brake, hydraulic, AC, or eddy-current absorber load control, throttle-position torque control, and switched relays to control fuel pump(s), engine starter, cell ventilation blowers, water supply valves, N2O injection, etc. Choose from “canned” cycles, or customize tests using its advanced custom automated-test-editor tool.
Electronic load and throttle control options – just push buttons to select the test RPM, or set a sweep rate and the DYNOmite’s own advanced PID algorithm runs the whole show – all hands free.
Inexpensively update that obsolete analog dyno for the new millennium. Computerization eliminates the need for two people to try and monitor the operation of your engine testing. It also eliminates observer bias from the results. Today’s front-runners are already scrutinizing every single line of their own dynamometer’s data; do not be left behind!
Convert motor, transmission, or chassis dynamometers! The DYNOmite and DYNO-MAX team includes features to allow optimizing them for almost any type of power train testing. Whether you are restoring some old analog emissions rolling-road, building a new transmission dyno, measuring an electric or air-motor’s performance, upgrading a speedometer calibration tester, or secretly testing your own space-age transportation invention… we are ready to help you. A DYNOmite conversion can bring full load control and road-load simulations to your inertia dyno, or cylinder-pressure mapping to many 1960 vintage water-brake systems. It does not matter if you are monitoring 100 or 100,000+ RPM shaft speeds. We offer ¼ to 10,000 ft-lb load cells, and support multi-channel data collection rates from 200 to over 200,000 Hertz. If you are upgrading a dyno, you have found your solution. Watch one customer's outboard powerhead dyno video!
Doubles as a race recorder to capture all your standard dyno data – at the track. Our array of “on-vehicle” sensor options include: forward and lateral Gs, distance, MPH, MPG, shift ratio, transmission slip, ETs, 0-5 volt auxiliary inputs (for lambda sensors, shock/suspension travel, etc.), wireless rotating driveshaft torque and Hp, OBD-II data, and GPS location (maps the vehicle’s position via orbiting satellites). Radio modem telemetry is even available to broadcast real-time track data back to your race pit crew’s laptop.
Live-person technical phone support provides a significant advantage over other companies’ obnoxious voice-mail runarounds. Our standard hardware phone and e-mail support, plus access to the special DYNOmite owners 24/7 web support area, are all FREE!
*Clayton is a trademark of Clayton Industries, Dynojet is a trademark of Dynojet Research, Inc., Dyno Dynamics is a trademark of Dyno Dynamics corporation, Froude is a trademark of Froude Consine Inc., Go-Power is a trademark of Froude Consine Inc., K & O is a trademark of International Dyno Inc., Maha is a trademark of Maschinenbau Haldenwang GmbH & Co. KG, Mustang is a trademark of Mustang Dynamometer, Stuska is a trademark of PowerTest Inc., SuperFlow is a trademark of SuperFlow Technologies Group.